Ar-15 Stock Cheek Rest

Telescoping Stock Cheek Rest Screw Telescoping Stock Cheek Rest Screw $6.25 Mfg: Benelli

Command Arms Caa Sniper Stock For Ar-15 Command Arms Sniper Stock For A2 Rilfe W/ No Monopod $229.99 The CAA Sniper Stock was designed with several years of testing and input from units of the IDF (Israel Defense Force) to meet the demands of the precision marksman community. The SRS Sniper Stock provides rapid target acquisition faster and more accurate follow up shots and quicker attainment of subsequent targets. Butt stock is completely adjustable including a 10 position length-of-pull stock from 13- half inch to 17 – half inch 13 horizontal and six vertical cheek rest positions vertically adjustable rubber butt pad and three position monopod locks. This system is designed to be used with a front bipod with angle of shot and elevation controlled by the rear monopod. There is a four Mfg: Sinclair

Command Arms Caa Sniper Stock For Ar-15 Command Arms Sniper Stock For A2 Rifle W/Rear Monopod $399.99 The CAA Sniper Stock was designed with several years of testing and input from units of the IDF (Israel Defense Force) to meet the demands of the precision marksman community. The SRS Sniper Stock provides rapid target acquisition faster and more accurate follow up shots and quicker attainment of subsequent targets. Butt stock is completely adjustable including a 10 position length-of-pull stock from 13- half inch to 17 – half inch 13 horizontal and six vertical cheek rest positions vertically adjustable rubber butt pad and three position monopod locks. This system is designed to be used with a front bipod with angle of shot and elevation controlled by the rear monopod. There is a four Mfg: Sinclair

Ak-47 Cheek Rests Ak-47 Cheek Rest $69.99 All metal construction Hard coat anodized finish Easy to install Clamps to side rail 4 attaching Allen head screws Fully adjustable for height and distance Attaches either left or right side of stock Fits forward folding stocks Stock can be foldedThe problem with most folding stocks is there is no comb to rest your face against for stability and proper shooting grip. The Samson AK47 Cheek Rest has an answer for proper long gun face weld and better accuracy without giving up the convenience and compactness of the forward folding AK-47 stock that we love so well. The Samson cheek rest is made of metal with a hard coat anodized finish to resist Mfg: Samson Manufacturing Corp SPECS: Metal construction Hard coat anodized finish Easy to install Clamps to side rail 4 attaching Allen head screws Fully adjustable for height and distance Attaches either left or right side of stock Fits forward folding stocks.

Ar-15 Arfx Skeleton Stock Arfx Skeleton Stock $89.99 Multiple sling points are but one of the many features that make this lightweight aluminum stock ideal for competition and tactical use. Supplied with an Uncle Mike’s QD 1.25" sling swivel and stud. A lightweight fast handling stock for sporting tactical and competition use. Gives three sling attachment points. Uses your existing A-2 fixed stock buffer tube as the top tube to keep weight to a minimum. Closed-cell foam over-tube provides a soft comfortable cheek weld plus insulates your face from vibration and inclement weather. Over-tube is formulated to withstand cleaning solvents and gun oils UV radiation freezing temperatures salt water and rough handling. Machined al Mfg: Double Star SPECS: 6061-T6 heat-treated aircraft grade aluminum Type 3 mil. spec. hard-anodized matte black. 10" (25.4cm) long. 10.4 oz. (296 g) wt. 

Ar-15 Le Entry Tactical Stock Le Entry Stock $57.5 A full stock with the same length as a collapsed M4 CAR stock; quick to shoulder fast handling and maneuverable in confined or restricted areas. Provides a consistent and comfortable cheek weld for greater control and accuracy. Compact dimensions reduce overall length to 32" when used with a 16" barrel. Furnished with carbine-length buffer tube and recoil spring. Mfg: Rock River Arms SPECS: Fiberglass/kevlar black matte finish. 7" (17.8cm) long.

Cheek Rest Retention Pin Cheek Rest Retention Pin $8.99 CHEEK REST RETENTION PIN Mfg: Beretta Usa

Ar-15/M16 Ctr?/Moe~ Stock Cheek Riser Ctr/Moe Cheek Riser 1/4" $19.99 Molded polymer cheek riser snaps onto Magpul CTR and MOE buttstocks to provide added support and ensure correct eye alignment with open sights or optics for fast target acquisition. Creates a stable platform for accurate long-range shooting. Three models let you to raise the cheekweld by ¼" ½" or ¾" for a personalized fit. No stock modification required. Designed for non-AR installations of CTR/MOE stocks; if installed on AR-15 stock must be left fully extended to allow operation of charging handle. Mfg: Magpul SPECS: Fiber-filled polymer composite black. Fits all Magpul CTR and MOE buttstocks.

Ar-15/M16 Ctr?/Moe~ Stock Cheek Riser Ctr/Moe Cheek Riser 3/4" $19.99 Molded polymer cheek riser snaps onto Magpul CTR and MOE buttstocks to provide added support and ensure correct eye alignment with open sights or optics for fast target acquisition. Creates a stable platform for accurate long-range shooting. Three models let you to raise the cheekweld by ¼" ½" or ¾" for a personalized fit. No stock modification required. Designed for non-AR installations of CTR/MOE stocks; if installed on AR-15 stock must be left fully extended to allow operation of charging handle. Mfg: Magpul SPECS: Fiber-filled polymer composite black. Fits all Magpul CTR and MOE buttstocks.

Ar-15/M16 Ctr?/Moe~ Stock Cheek Riser Ctr/Moe Cheek Riser 1/2" $19.99 Molded polymer cheek riser snaps onto Magpul CTR and MOE buttstocks to provide added support and ensure correct eye alignment with open sights or optics for fast target acquisition. Creates a stable platform for accurate long-range shooting. Three models let you to raise the cheekweld by ¼" ½" or ¾" for a personalized fit. No stock modification required. Designed for non-AR installations of CTR/MOE stocks; if installed on AR-15 stock must be left fully extended to allow operation of charging handle. Mfg: Magpul SPECS: Fiber-filled polymer composite black. Fits all Magpul CTR and MOE buttstocks.

Ar-15 Raised Cheekpiece Ar-15 Cheekpiece $29.95 AR-15 Cheekpiece provides correct head position and eye alignment for scope sighted rifles. Clamps over A-1 and A-2 buttstocks installs in minutes with no modifications to stock. Textured matte-black surface blends well with stock. Soft rubber top section gives added comfort. Shorty Cheekpiece provides correct scope-to-eye alignment to AR-15 rifles with collapsible buttstock. Soft rubber cheekpad improves shooting comfort gives 1¼" additional height. Quick snap-on installation. Mfg: John Masen SPECS: AR-15 Cheekpiece – Plastic black. 6" (15.2cm) long. Raises height of comb 1¼" (3.2cm). Shorty Cheekpiece – Plastic black. 5-3/4" (14.6cm) long.

Full Cheek Snaffle Bit Stock Pin $5.8 Full Cheek Snaffle Bit Stock Pin. 2L

Ar-15 Buttstock Extender Ar-15 Stock Extension $31.99 Aluminum extension provides an extra inch of stock length for AR-15A1 and A2 rifles. Helps shooters achieve a more comfortable head position for faster sight alignment plus the extra length improves recoil and trigger control. Provides tall shooters and those long arms a more comfortable natural stock fit. Installs between stock and receiver; has the correct profile for a "belongs there" look. Mfg: Dpms Firearms Llc SPECS: 6061 T-6 aluminum black matte finish. Includes buffer tube extension and longer stock screws.

Ar-15 Buttstocks Carbine Stock Green $45 Traditional-length Rifle Buttstocks feature an easy-to-open storage compartment for emergency field tools parts or a Brownells AR-15 Buttstock Cleaning Kit. Fits both A1 and A2. SOCOM/M4 Carbine Buttstock collapses to save space or accommodate shooters wearing body armor. Replacement only—fits existing carbine extension tubes. Mfg: Cavalry Manufacturing Llc. SPECS: Rifle Buttstock – 9-3⁄8" (23.8cm) long 5” (12.7cm) high at tallest point 2-1⁄8" (5.4cm) high at shortest point 1-5⁄8" (4.1cm) wide. SOCOM/M4 Carbine Telescoping Buttstock – 6¾” (17.1cm) long 5-1⁄8" (13cm) high. Buttstock only does NOT include extension tube.

Ar-15 Buttstocks Rifle Stock Green $45 Traditional-length Rifle Buttstocks feature an easy-to-open storage compartment for emergency field tools parts or a Brownells AR-15 Buttstock Cleaning Kit. Fits both A1 and A2. SOCOM/M4 Carbine Buttstock collapses to save space or accommodate shooters wearing body armor. Replacement only—fits existing carbine extension tubes. Mfg: Cavalry Manufacturing Llc. SPECS: Rifle Buttstock – 9-3⁄8" (23.8cm) long 5” (12.7cm) high at tallest point 2-1⁄8" (5.4cm) high at shortest point 1-5⁄8" (4.1cm) wide. SOCOM/M4 Carbine Telescoping Buttstock – 6¾” (17.1cm) long 5-1⁄8" (13cm) high. Buttstock only does NOT include extension tube.

Ar-15 Buttstocks Rifle Stock Black $45 Traditional-length Rifle Buttstocks feature an easy-to-open storage compartment for emergency field tools parts or a Brownells AR-15 Buttstock Cleaning Kit. Fits both A1 and A2. SOCOM/M4 Carbine Buttstock collapses to save space or accommodate shooters wearing body armor. Replacement only—fits existing carbine extension tubes. Mfg: Cavalry Manufacturing Llc. SPECS: Rifle Buttstock – 9-3⁄8" (23.8cm) long 5” (12.7cm) high at tallest point 2-1⁄8" (5.4cm) high at shortest point 1-5⁄8" (4.1cm) wide. SOCOM/M4 Carbine Telescoping Buttstock – 6¾” (17.1cm) long 5-1⁄8" (13cm) high. Buttstock only does NOT include extension tube.

Ar-15 Buttstocks Rifle Stock Coyote $45 Traditional-length Rifle Buttstocks feature an easy-to-open storage compartment for emergency field tools parts or a Brownells AR-15 Buttstock Cleaning Kit. Fits both A1 and A2. SOCOM/M4 Carbine Buttstock collapses to save space or accommodate shooters wearing body armor. Replacement only—fits existing carbine extension tubes. Mfg: Cavalry Manufacturing Llc. SPECS: Rifle Buttstock – 9-3⁄8" (23.8cm) long 5” (12.7cm) high at tallest point 2-1⁄8" (5.4cm) high at shortest point 1-5⁄8" (4.1cm) wide. SOCOM/M4 Carbine Telescoping Buttstock – 6¾” (17.1cm) long 5-1⁄8" (13cm) high. Buttstock only does NOT include extension tube.

Ar-15 Buttstocks Carbine Stock Black $45 Traditional-length Rifle Buttstocks feature an easy-to-open storage compartment for emergency field tools parts or a Brownells AR-15 Buttstock Cleaning Kit. Fits both A1 and A2. SOCOM/M4 Carbine Buttstock collapses to save space or accommodate shooters wearing body armor. Replacement only—fits existing carbine extension tubes. Mfg: Cavalry Manufacturing Llc. SPECS: Rifle Buttstock – 9-3⁄8" (23.8cm) long 5” (12.7cm) high at tallest point 2-1⁄8" (5.4cm) high at shortest point 1-5⁄8" (4.1cm) wide. SOCOM/M4 Carbine Telescoping Buttstock – 6¾” (17.1cm) long 5-1⁄8" (13cm) high. Buttstock only does NOT include extension tube.

Ar-15 Buttstock Assembly Butt Stock Assembly $95.99 The easiest way to stock and sell genuine mil-spec AR-15 parts or use to assemble rifles on your receivers. Much lower in total cost than buying the parts one at a time. All kits listed contain only new current-production genuine mil-spec parts; never pull-offs or direct-exchange surplus. Kit includes buttstock shell door ­assembly buttplate hinge and pin rear swivel lower buttstock screw upper buttstock screw aluminum buttstock spacer ­extension tube buffer and buffer spring. Mfg: Dpms Firearms Llc SPECS: Unassembled kits packaged in heat-sealed poly bags ­labeled for resale. Fits AR-15 only.

Magpul Ar-15 Precision Rifle Stock Magpul Ar-15 Precision Rifle Stock $254.95 The Magpul Generation II Precision Rifle/Sniper butt stock is a drop-in fully adjustable precision stock assembly for standard A1/A2 fixed buffer rifles. The stock assembly mounts to the rifle receiver extention tube accepts standard buffer and spring and adjusts length-of-pull and comb height with two machined aluminum click-detent adjustment wheels. Ribbed rubber buttpad is correctly shaped for less fatigue and no slip during extended shooting sessions and wearing complete operational gear. Fully raised comb will not interfere with charging handle operation. Two 1-one fourth inch sling attachments (front and rear) which can be mounted right side or left side are included. Total length-of Mfg: Magpul

Ar-15 M4 Stock Wrench M4 Stock Wrench $6 Steel dual function wrench lets you easily remove your old extension tube and install a new-style A4 stock. Spanner has three lugs to fit the A4-style castle nut. Provides a non-slip fit so you can correctly torque the stock to the receiver. Also the comfortable rubber coated handle features a cutout to fit the receiver extension tube to remove the A1 or A2 stock. Mfg: Rock River Arms SPECS: Steel parkerized finish. 7-5/8" (19.3cm) long.

Shotgun Ar-15 Stock Conversion Rem. Conv. Unit W/M4 Stock $309.99 Machined aluminum stock adapter with Picatinny rail lets you upgrade your shotgun with an AR-15 or M4 buttstock to create the ultimate tactical Remington 870 or Mossberg 500/590. Changes the geometry of the gun to minimize muzzle jump and requires no drilling or tapping of the receiver. Mossberg models feature an ambidextrous replacement safety machined specifically to eliminate failure caused by sand and grit. Conversion Unit includes adapter/rail assembly only to accept your aftermarket receiver extension tube buttstock and pistol grip. A1 adds a fixed position A1 rifle buttstock and standard AR-15 pistol grip. M4 includes collapsible stock and pistol grip. Mfg: Cavalry Manufacturing Llc. SPECS: Conversion Unit – Aluminum anodized black matte finish. Approximately 3.7" (9.4cm) high 3.4" (8.6cm) long 1" (2.54cm) thick. Rail – Aluminum anodized black matte finish. 7" (17.8cm) long .64" (16.2mm) wide .64" high. A1 Stock – 14¼" (36.2cm)

Shotgun Ar-15 Stock Conversion Moss. Conv. Unit W/M4 Stock $299.99 Machined aluminum stock adapter with Picatinny rail lets you upgrade your shotgun with an AR-15 or M4 buttstock to create the ultimate tactical Remington 870 or Mossberg 500/590. Changes the geometry of the gun to minimize muzzle jump and requires no drilling or tapping of the receiver. Mossberg models feature an ambidextrous replacement safety machined specifically to eliminate failure caused by sand and grit. Conversion Unit includes adapter/rail assembly only to accept your aftermarket receiver extension tube buttstock and pistol grip. A1 adds a fixed position A1 rifle buttstock and standard AR-15 pistol grip. M4 includes collapsible stock and pistol grip. Mfg: Cavalry Manufacturing Llc. SPECS: Conversion Unit – Aluminum anodized black matte finish. Approximately 3.7" (9.4cm) high 3.4" (8.6cm) long 1" (2.54cm) thick. Rail – Aluminum anodized black matte finish. 7" (17.8cm) long .64" (16.2mm) wide .64" high. A1 Stock – 14¼" (36.2cm)

Shotgun Ar-15 Stock Conversion Rem. Conv. Unit W/A1 Stock $279.99 Machined aluminum stock adapter with Picatinny rail lets you upgrade your shotgun with an AR-15 or M4 buttstock to create the ultimate tactical Remington 870 or Mossberg 500/590. Changes the geometry of the gun to minimize muzzle jump and requires no drilling or tapping of the receiver. Mossberg models feature an ambidextrous replacement safety machined specifically to eliminate failure caused by sand and grit. Conversion Unit includes adapter/rail assembly only to accept your aftermarket receiver extension tube buttstock and pistol grip. A1 adds a fixed position A1 rifle buttstock and standard AR-15 pistol grip. M4 includes collapsible stock and pistol grip. Mfg: Cavalry Manufacturing Llc. SPECS: Conversion Unit – Aluminum anodized black matte finish. Approximately 3.7" (9.4cm) high 3.4" (8.6cm) long 1" (2.54cm) thick. Rail – Aluminum anodized black matte finish. 7" (17.8cm) long .64" (16.2mm) wide .64" high. A1 Stock – 14¼" (36.2cm)

Gapper Insert For Ar-15 Gapper Insert For Ar-15 $3.95 All stock gripped AR-15′s have a little void between the front of the pistol grip and the rear of the trigger guard. This hole irritates some shooters during a long shooting session. The GAPPER clips in place and completely eliminates this rough spot. Doesn’t change service rifle silhouette. Made of solvent resistant polyurethane. Mfg: Falcon Industries/Ergo Grips

Sks Fiberforce Stock Sks Fiberforce Stock $69.99 DuPont Extreme Temperature Glass Reinforced Polymer Matte black finish Ventilated forearm Dragunov designed stock Duel sling mounts Thumbhole grip Adjustable cheek rest with room to store cleaning kit Ambidextrous operation Easy drop-in installation Scratch resistant Weatherproof All SKS rifles Note: legal warning Lifetime manufacturer’s warrantyTheAdvanced Technology SKS Fiber Force Stocks is perfect for SKS owners who want to upgrade their rifle but remain true to it’s Russian design. It will make your SKS look like the Dragunov sniper rifle. This stock features extra venting in the forearm to keep overheating to a Mfg: Advanced Technology SPECS: DuPont Extreme Temperature Glass Reinforced Polymer Matte black finish Ventilated forearm Dragunov designed stock Duel sling mounts Thumbhole grip Adjustable cheek rest with room to store cleaning kit Ambidextrous operation Drop-in installation Scratch resistant Weatherproof Use wi

Ar-15 Multi-Tool Ar-15 Multi-Tool $33.99 Durable steel wrench gives you seven tools-in-one for maintenance repair or building AR-15 and M16 rifles. Use to install or remove: free float tubes and peg-style barrel nuts standard barrel nuts carbine stock compensator extension tube and buttstock screw. Special features include 5⁄8" and ¾" wrench slots a ½" square hole for a torque wrench plus screwdriver tip for buttstock. Mfg: Dpms Firearms Llc SPECS: 4140 steel black parkerized finish. 12" (30cm) long 1" (2.5cm) wide handle.

AR-15 Handguard Rail Bipod $62.5 To make consistently accurate shots critical last-second adjustments to the rifle’s position is usually always required along with a stable rest. With this in mind, we created our newest line of bipod models with features that allow you to easily set up and make these necessary adjustments. These bipods fit AR-15 and SKS rifles and also include a universal model that will fit an almost unlimited choice of rifle types. Backed by the manufacturer’s 1 Year Limited WarrantyFEATURES:Mounts to SKS AR RailADJUSTABLE HEIGHT: 8.3″-11.4″Made of steelQuick-detach mount works with any Picatinny® style rail.Finger tip height adjustment for ultimate precision.PRODUCT SPECIFICATIONS:Adjustable Height: 8.3″~11.4″Material: SteelApplicable Firearms: AR-15

Sks Strikeforce Stock Sks Stock $110.95 Six position stock lets you adjust length of pull and folds for ultimate compactness when storing the rifle. Made from durable glass-filled nylon composite with a rubber buttpad that has a slight negative angle for quick and easy shouldering. Easy-to-operate spring-loaded release lever for quick adjustments of the buttstock. Cheek rest has 7/8" vertical adjustment and buttstock can be raised an additional ¼" with included spacer to provide correct eye alignment with optics. Sling swivel studs mount in different locations to allow a variety of sling options for right- or left-handed operators. Picatinny rails with removable covers on handguards provide additional accessory Mfg: Advanced Technology SPECS: Glass-filled nylon black. Buttstock – 7½" (19cm) long x 3-7⁄8" (9.8cm) high. Pistol Grip – 4¼" (10.8cm) long x 1-3⁄8" (3.5cm) wide. 31¼" (79.4cm) overall stock length opened 27¼" (69.2cm) folded. Mounting hardware include

Build Your Own AR-15 $19.85 Have you looked at the various do-it-yourself kits and decided that they might be too tough to tackle? If yes, then this is the book for you. You can build your own AR-15 for no more than the costs of a stock rifle and have a one of a kind weapon that you can truely call your own. 5.5" x 8.5," illus. & photos, softcvr.

Ak-47 Strikeforce Stock Ak-47 Stock $99.99 Six position stock lets you adjust length of pull and folds for ultimate compactness when storing the rifle. Made from durable glass-filled nylon composite with a rubber buttpad that has a slight negative angle for quick and easy shouldering. Easy-to-operate spring-loaded release lever for quick adjustments of the buttstock. Cheek rest has 7/8" vertical adjustment and buttstock can be raised an additional ¼" with included spacer to provide correct eye alignment with optics. Sling swivel studs mount in different locations to allow a variety of sling options for right- or left-handed operators. Picatinny rails with removable covers on handguards provide additional accessory Mfg: Advanced Technology SPECS: Glass-filled nylon black. Buttstock – 7½" (19cm) long x 37⁄8" (9.8cm) high. Pistol Grip – 4¼" (10.8cm) long x 13⁄8" (3.5cm) wide. Forend – 6½" (16.5cm) long 2" (5.1cm) wide 2½" (6.3cm) high. Fits AK variants with st

NcStar Stock Riser with Mag Pouch Tan $13 NcStar Stock Riser with Mag Pouch Tan Tactical Cheek Pad Riser Rest With Mag Pouch. This is a Universal design cheek rest soft riser with ambidextrous detachable magazine pouch will fit most traditional style rifle stocks. Allow for better eye placement with your scope by giving you a tight cheek weld for optimum accuracy with comfort a softer and more ergonomic cheek positioning. Features: * Mounts to Stock with Laced cinch. * Ambidextrous Magazine can be placed on either side with Hook and Loop system. * Assists in shooting with Optics by giving you a Tight Cheek Weld for Optimum Accuracy.

NcStar Stock Riser with Mag Pouch Green $13 NcStar Stock Riser with Mag Pouch Green Tactical Cheek Pad Riser Rest With Mag Pouch. This is a Universal design cheek rest soft riser with ambidextrous detachable magazine pouch will fit most traditional style rifle stocks. Allow for better eye placement with your scope by giving you a tight cheek weld for optimum accuracy with comfort a softer and more ergonomic cheek positioning. Features: * Mounts to Stock with Laced cinch. * Ambidextrous Magazine can be placed on either side with Hook and Loop system. * Assists in shooting with Optics by giving you a Tight Cheek Weld for Optimum Accuracy.

Marlin Fiberforce Stock Marlin Fiberforce Stock $59.99 DuPont Extreme Temperature Glass Reinforced Polymer Matte black finish Weight: 26 ounces Ventilated forearm and hand guard Pistol grip with ambidextrous thumb through the stock Built in cheek rest Two sling swivel studs Easy drop-in installation Scratch resistant Weatherproof Lifetime manufacturer’s warrantyDress up your Marlin rifle with theAdvanced Technology Marlin Fiber Force Stock and shoot better at the same time. The Marlin Fiber Force Stock features a ventilated forearm and hand guard for a cooler barrel. It weighs only 26 ounces which makes your rifle more comfortable to carry in the field. The ambidextrous pistol grip ha Mfg: Advanced Technology SPECS: DuPont Extreme Temperature Glass Reinforced Polymer Matte black finish weight: 26 ounces Ventilated forearm and hand guard Ambidextrous pistol grip Thumb through stock Built in cheek rest Easy drop-in installation Scratch resistant Weatherproof Lifetime manufacturer’s warranty.

Ar-15 Raised Cheekpiece Shorty Cheekpiece $24.95 AR-15 Cheekpiece provides correct head position and eye alignment for scope sighted rifles. Clamps over A-1 and A-2 buttstocks installs in minutes with no modifications to stock. Textured matte-black surface blends well with stock. Soft rubber top section gives added comfort. Shorty Cheekpiece provides correct scope-to-eye alignment to AR-15 rifles with collapsible buttstock. Soft rubber cheekpad improves shooting comfort gives 1¼" additional height. Quick snap-on installation. Mfg: John Masen SPECS: AR-15 Cheekpiece – Plastic black. 6" (15.2cm) long. Raises height of comb 1¼" (3.2cm). Shorty Cheekpiece – Plastic black. 5-3/4" (14.6cm) long.

Shotgun Ar-15 Stock Conversion Rem. Conv. Unit Only $229.99 Machined aluminum stock adapter with Picatinny rail lets you upgrade your shotgun with an AR-15 or M4 buttstock to create the ultimate tactical Remington 870 or Mossberg 500/590. Changes the geometry of the gun to minimize muzzle jump and requires no drilling or tapping of the receiver. Mossberg models feature an ambidextrous replacement safety machined specifically to eliminate failure caused by sand and grit. Conversion Unit includes adapter/rail assembly only to accept your aftermarket receiver extension tube buttstock and pistol grip. A1 adds a fixed position A1 rifle buttstock and standard AR-15 pistol grip. M4 includes collapsible stock and pistol grip. Mfg: Cavalry Manufacturing Llc. SPECS: Conversion Unit – Aluminum anodized black matte finish. Approximately 3.7" (9.4cm) high 3.4" (8.6cm) long 1" (2.54cm) thick. Rail – Aluminum anodized black matte finish. 7" (17.8cm) long .64" (16.2mm) wide .64" high. A1 Stock – 14¼" (36.2cm)

Shotgun Ar-15 Stock Conversion Moss. Conv. Unit Only $219.99 Machined aluminum stock adapter with Picatinny rail lets you upgrade your shotgun with an AR-15 or M4 buttstock to create the ultimate tactical Remington 870 or Mossberg 500/590. Changes the geometry of the gun to minimize muzzle jump and requires no drilling or tapping of the receiver. Mossberg models feature an ambidextrous replacement safety machined specifically to eliminate failure caused by sand and grit. Conversion Unit includes adapter/rail assembly only to accept your aftermarket receiver extension tube buttstock and pistol grip. A1 adds a fixed position A1 rifle buttstock and standard AR-15 pistol grip. M4 includes collapsible stock and pistol grip. Mfg: Cavalry Manufacturing Llc. SPECS: Conversion Unit – Aluminum anodized black matte finish. Approximately 3.7" (9.4cm) high 3.4" (8.6cm) long 1" (2.54cm) thick. Rail – Aluminum anodized black matte finish. 7" (17.8cm) long .64" (16.2mm) wide .64" high. A1 Stock – 14¼" (36.2cm)

AR-15 upgrades, accuracy and aesthetically minded.?

I recently purchased a Oly Arms 5.56 carbine. Shoots great, but is a plain jane.

A Navy friend donated a Harris bi-pod, vertical grip w/ bi-pod, collapsable stock with flared cheek rests, and some removeable rear iron sights.

Since there are just SOOOOO much AR accessories available, I am looking for the higher grade parts as follows;

Picatinny gas block, floating picatinny hand guard, trigger, trigger guard, grip.

I have also been checking out the stock weights that are supposed to increase accuracy, recoil buffer and springs that are supposed to do the same.

I wish to spend $500 or less.

Experienced AR builders/shooters lemme know.

Anti-schwoogs and schvatzes need not reply!

Natches Shooters Supply.Midway.Cheaper than dirt.All have good stuff.I didn’t have to bolt on a bunch of stuff with my BUSHMASTER V MATCH .( 24″fluted,chrome lined barrel) I got an adjustable butt plate from SINCLAIR INTERNATIONAL.Strapped a target scope on it and it shoots like a dream.2 years ago I purchased an OLY K16 for my daughter .Short barrel but still shoots pretty well.She got her stock at a gun show.You might consider a better trigger for yours.Chip McCormick makes a DROP IN trigger for AR’s that only cost about $160 .We put one in the kids .I put a JEWELL in mine .Shoots WAY better then the stock trigger.

FAB DEFENSE TACTICAL RECOIL REDUCING STOCK GL-SHOCK BEST ASSUALT RIFLE ACCESORY